Fix ‘this device cannot start’ Errors in Windows PC

Fix ‘this device cannot start’ Errors in Windows PC

Hello Geeky, so today we are focusing on Fix ‘this device cannot start’ Errors in Windows PC. So please read this tutorial carefully so you may comprehend it in a better helpful way.

Guide: Fix ‘this device cannot start’ Errors in Windows PC

We generally accept Windows errors. They are terrible, however they can be effectively remedied in the sense that you know how to solve them well. Windows blunder “This device cannot start. (code 10) ”is one of those Windows errors that may seem difficult to fix immediately, yet it is not difficult to fix.

It is often difficult to say where to start as long as you are familiar with your Device Manager and other technical issues that you may not understand. Anyway, with this article on fixing Windows 10 error code, we will tell you arbitrarily the best way to handle this issue!

What is error code 10?

  • “This device cannot start” error 10 is related to removable devices. It will appear when Windows cannot run any hardware, such as a printer or USB drive, properly.
  • Because of this, you may find out after Windows tried to install drivers for a new device. In some cases, it may prevent CD drivers, Bluetooth applications, or storage devices from displaying up in this PC.
  • You will also find this position for devices just on the General tab in their Device Manager entry, which is discussed later. Usually code 10 will appear due to problems with sound or special USB devices. Let’s look at the corrections for this case.

Reboot your Computer

  • Like most computer cases, it can sometimes be clean up this code 10 problem with a simple we also. You should always take this basic troubleshooting step, so you do not waste time on further unnecessary steps.
  • Restart your computer, then try to access the device again. It is a good idea to unplug the device and plug it into it after restarting, in case you have a loose connection or something.
  • If the error message persists up after this basic step, proceed to troubleshooting further progress.

Running Hardware Device Troubleshooting

  • Windows includes many automated troubleshooting tips that help you solve many problems. One of them is Hardware and Equipment, which fixes issues in this area. While it is not recommended to find anything, it is worth working when you have this case.
  • For some reason, Microsoft removed this important application from the Troubleshooting menu in Windows 10, but it can also be accessed via the Command or PowerShell command. To launch this, press Win + X or right-click on Start button and select Right Command or Windows PowerShell from the menu, then click the following line:
  • This will open troubleshooting in a new window. Click Next to walk through it; once the setup is complete, it will let you know of any issues you found and the consequences for fixing them.

Check Device Manager for more information

  • Device Manager collects information about all the devices connected to your PC, so it is important to check when you find a code 10 error. To open, press Win + X or right-click on Start button, then select Device Manager from the menu.
  • You can expand each category to see individual devices under it. If a device has a problem, you will see a small yellow warning sign next to it; this should indicate the device causing the error. Double-click any type of item and check the device status field; if it says that this Device cannot start (code 10), then it is not working properly.
  • You should check out all the categories here; Sound inputs and outputs and Serial Bus controllers are all two common culprits. If you do not see the problem in either of them, look at other USB devices such as Printers and Mice and other reference devices. If you have recently installed any hardware to your computer, check that too.
  • When you see the device appear with an error, try uninstalling the device for a few minutes, then flip it back on. If this does not work, you should move on to updating or removing drivers for the device.

Update Hardware Drivers

  • Often, something of the wrong application because you have an outdated or incorrect driver installed for you. Head to Settings> Updates & Security> Windows Update to check for the latest updates, which is always a good idea when you have Windows troubleshooting.
  • Checking this for updates will also find driver updates. These can appear under View option updates> Driver updates, so be sure to check there too.
  • To update a specific driver that does not appear there, right-click on Device Manager and select Update Driver> Auto Search for drivers. This will check your computer for the latest drivers.
  • If that does not work, search for your device name online to see if there are any new drivers from the manufacturer. Follow us guide to update older Windows drivers for more help. In case the new driver does not work (maybe the manufacturer has changed a buggy update), you can try installing an older version. This is not a good long-term solution, but it is worth a try.

Remove non-functional drivers

  • In case the driver driver does not work, you should try to monitor or remove the driver. Right-click on the device and select Properties, followed by the Drivers tab, for a few options.
  • Selecting a Roll Back Driver will restore any recent updates and return to the previous version. This is only accessible if an older member comes to return, however.
  • If you are unable to do this, you will need to select Uninstall the device to completely remove it from your device. After doing so, reboot. Windows should install generic drivers for some devices, such as mice and keyboards, when it restarts. However, it is possible to re-install any specific drivers, such as those of game mice, manually.
  • Hopefully, a reboot will cause the error code 10 to stop. If not, there are more ways to fix the message “device cannot start”.

Try another USB Port or Stage

  • If you already know what device is causing code 10 error to appear, try plugging it into another USB port on your computer. There is a chance that your USB port may be faulty, causing communication issues between your device and your PC.
  • Also, if you use any basic USB ports with your computer, consider replacing them with more powerful models. A USB port with its own power source, such as the USB 3.0 port of Sabrent, is more reliable than one that relies on your PC for power.

Disable UpperFilters and LowerFilters in the Registry

  • As a step forward, you can delete a pair of registry values ​​related to filter drivers, which work between Windows and the application. Deleting these can solve code 10 errors at once.
  • Making incorrect changes in the Registry can lead to more problems, so be sure to be careful during this process:
  • Press Win + R to open the Run dialog box and press regedit to launch Registry Editor.
  • Use the navigation bar on the left to navigate to the following location: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass.
  • With the Class key expanded, you will find many buttons below which are long sentences of characters. These GUIDs (Global Unique Identities) are all compatible with different types of applications in Device Manager.
  • Now, you will need to find the perfect GUID for the type of device you are looking for. To do this, go back to Device Manager and double click on a device that has a problem. Switch to the Details tab on the output window and change the property dropdown box to Class Guide.
  • A value will appear in the box below, which corresponds to one of the keys in the Registry.
  • Back in the Registry Editor, click the corresponding string of characters in the left side of the registry to open its contents on the right. Some of these seem the same, so make sure you get the right one. Once you are in the right folder:
  • Find applications UpperFilters and LowerFilters. You can only see one of them, which is nice. If you do not see either, double check that you have enough GUID. If you are convinced that you are entitled and have never seen them again, then this will not work for you.
  • Right-click on UpperFilters and / or LowerFilters and select Delete. Confirm the warning and the file will be deleted.
  • Restart your computer, then check the device again to see if it works.

Test your Hardware Elsewhere

  • At this point, if you still find code 10, you probably have the wrong device. If possible, try connecting the hardware to another computer and see if it works at all.
  • If it does not work on another system, then you should contact the manufacturer or replace the device. In case you are working on another system, then the problem is with your device.

Perform Restore or Reset settings

  • If you tested your device as working on another computer, you can try restarting the system to see if there is a Windows quirk that is blocking the application from working. This restores your system to the previous point in time, which is useful if the problem starts sooner.
  • If this fails, you may be able to perform a full reset of Windows, but that may be too much for this problem. Application problems, especially at this point, are always in conflict with the device itself. But if your device is running elsewhere and you do not mind trying, running Windows 10 Configuration can solve the problem.


Guide about Fix ‘this device cannot start’ Errors in Windows PC

In this guide, we told you about the Fix ‘this device cannot start’ Errors in Windows PC; please read all steps above so that you understand Fix ‘this device cannot start’ Errors in Windows PC in case if you need any assistance from us, then contact us.

How this tutorial or guide assisting you?

So in this guide, we discuss the Fix ‘this device cannot start’ Errors in Windows PC, which undoubtedly benefits you.

Final note

I hope you like the guide Fix ‘this device cannot start’ Errors in Windows PC. In case if you have any queries regards this article/tutorial you may ask us. Also, please share your love by sharing this article with your friends and family.

Trickbugs: Get the latest Trick and Tips
Enable registration in settings - general