How to Configure ASUS RT-AC68U as a Repeater and Access Point

Hello Geeky, so today we are focusing on How to Configure ASUS RT-AC68U as a Repeater and Access Point. So please read this tutorial carefully so you may comprehend it in a better helpful way.

Guide: How to Configure ASUS RT-AC68U as a Repeater and Access Point

The vast majority of users do not understand how to setup Asus rt-ac68u repeater mode. Asus Switch supports different operating modes to meet different user needs. To check the type of working wireless router working with, you should refer to the decision of the switch on the ASUS site. Likewise, the Asus RT-AC68U is equipped with wireless router mode which is the default mode for the router.

While in New Mode, the RT-AC68R is wireless connected to the current wireless network to extend its remote inclusion to a wide area. Capabilities such as firewall, IP sharing, and NAT capabilities are disabled in this mode. The Asus repeater mode is necessary to prevent weak transmissions of the current wireless network.

This post will be directed to you how to Asus router setup as a repeater.

How to configure Asus RT-AC68U?

Well, there are many features you will use while setting up your new RT- AC68U. The following tutorial is about planning up router with basic setup options.


There are three cables that you need to connect for the connection under your router.

  • Connect the Ethernet cable from your modem to the WAN port on your Asus router. You will be able to search through the globe ring icon above it. The port is marked blue for easy identification.
  • Connect the Ethernet port from your computer to the LAN port. You can use any of the four available LAN terminals. Ports are marked 1,2,3 and 4. They can be identified by their yellow dot.
  • Now, connect the supplied power cord to the wall outlet and to the DCIN port on your router. The port is marked in red in the image below.

Once all the cables are connected, and you are all set up, press force button to switch on your Asus RT-AC68U router. Check out the image below marked in blue. That should complete the connections and settings up physical components of your router.

It is a configuration

Once everything is connected, the router is turned on; The next step will be to configure your connection. Here’s how to do it –

  • Launch any of your favorite browsers.
  • Asus configuration should open automatically.
  • If not, enter the following address into the address bar on your browser.
  • When you are ready to enter your username and password, click Admin in both fields and click OK.
  • You should be taken to the main setup page. This will give you information on the product and let you know a little more features that the router offers it.
  • Click on Go on this page.
  • Change the default username and password according to your preferences. You can leave them as default, but it is highly recommended to change the settings so that it does not end up granting access to other of your passports.
  • Change the password and username in the corresponding boxes and click Next.
  • The router will now start looking for your connection. You may need to enter additional information if they are authorized by your ISP – Internet Service Provider. Ideally, the router should be able to see your connection.
  • Enter the network name (also referred to as the SSID) and password (this is referred to as the network key). Type the following information into the corresponding boxes and click on
  • You should find details of the new configuration settings. Review them once and then click Next.
  • The login order should appear now. Enter the previously entered certificates. Note that while the username and password are entered as Admin first, but if you have changed them in the steps above, you will need to enter new credentials.
  • The settings page for the router will now open again. Click on Sign out and click OK when done.
  • That does. You have successfully configured your Asus RT-AC68U for your network.
See also  How to Delete WeChat account

How to Connect Asus RT-AC68U as access point?

Before proceeding with the program up your Asus router as an access point, it would be a good idea to understand what exactly is an Access point. Let us know the jargons first.

The access point is used as a means of expanding your WiFi area. It can help you increase the number of connected devices and users. Creating access with your Asus router will require you to use an Ethernet cable to the modem or another router. This will help you to convert the signal sent from the modem into a wireless signal. After understanding the importance of access point, here’s how to connect an Asus Router to a modem to create an access point.

  • Connect the WAN port on your Asus RT-AC68U to the LAN port on your modem or parent router. The step will be the same as before tutorial. The WAN port is marked in Blue for easy access.
  • Log in to the admin page as we did in the previous link tutorial.
  • Move to Administration> Operational mode.
  • Select the option that says Access Mode (AP) and click Save.
  • You should be taken to a page where you need to enter IP addresses.
  • Click on the radio YES button at the top to enter settings automatically. Of course, you can enter the details manually, but we like the automatic search for easy configuration without any errors.
  • Click on Next
  • Now the next step will be to make a small copy. Okay, we are just referring to the fact that you should think of a good name for your network. Enter the desired name and password for your network.
  • Once everything is set up correct, click on Apply button to save your settings.
See also  How to Delete Photos From Android

How to Set up Asus RT-AC68U as WiFi repetition?

  • Again, if you are new to the world of network configuration, the issue may be a little confusing for you. What is a WiFi repeater?
  • WiFi Repeater is a way of expanding WiFi coverage to a specific area. WiFi repeats connect to the existing WiFi network, increase the signal and forward it further. He hopes to move WiFi repetition to areas where the WiFi signal is already strong.
  • WiFi can also help to cover a large space like a hall or even with an extended corridor. This can help you expand the area of ​​your WiFi Connect over an extended area.
  • Now that we understand what a WiFi repeater can do to improve the performance of your WiFi Network let us check now how to configure your Asus RT – AC68U router as a WiFi repeater. Please note that your parent network should already be configured for Asus router service as a replacement for you.

Here are the steps in the process-

  • Connect your Asus router to it laptop or PC via ethernet cable. Connect the cable to the LAN port on your router.
  • Switch on your router.
  • Access the router admin page as described above tutorial for special connectivity and configuration.
  • Move to the Administration section.
  • Select Active Mode and then select New Mode Radio button.
  • Click on SAVE
  • The router will start searching for available networks.
  • Once you find the network you are looking for, select from the list.
  • Enter the password for the selected network and click on
  • You should be asked to enter IP addresses. We will advise you to select automatic search and let the IP addresses fill in automatically.
  • Click on Next.
See also  How to delete apps on your Android,Apple and tablets

Line up up router like WiFi repeater can take a while. Wait until the router gives itself to the effect of the WiFi adapter.

How to save your default Router Settings?

Therefore, you will generally change the settings on your router to what you want for better performance. But, what to do in case something goes wrong and you need to go back to the default settings? That’s exactly where the backup plans would be an added benefit.

Thankfully, the Asus RT -AC68U router comes with an option for support up the default settings. Here’s how to put one together for use with your home up default settings on Asus router –

  • Head to the Administration section as described in the previous sections and go to the section called Restore / Save / Assemble
  • Click the SAVE option and save the settings in the form of a CFG file.
  • You can upload the file on any of your favorite cloud services so you can download them later when needed.
  • When you want to restore the system in the future, you can use the Restore option to recover the file and use the default settings on your router.


Guide about How to Configure ASUS RT-AC68U as a Repeater and Access Point

In this guide, we told you about the How to Configure ASUS RT-AC68U as a Repeater and Access Point; please read all steps above so that you understand How to Configure ASUS RT-AC68U as a Repeater and Access Point in case if you need any assistance from us, then contact us.

How this tutorial or guide assisting you?

So in this guide, we discuss the How to Configure ASUS RT-AC68U as a Repeater and Access Point, which undoubtedly benefits you.

Final note

I hope you like the guide How to Configure ASUS RT-AC68U as a Repeater and Access Point. In case if you have any queries regards this article/tutorial you may ask us. Also, please share your love by sharing this article with your friends and family.

Trickbugs: Get the latest Trick and Tips
Enable registration in settings - general