Tips to Create Your Own Android TV Box Using Raspberry Pi

Tips to Create Your Own Android TV Box Using Raspberry Pi

Hello Geeky, so today we are focusing on How to Create Your Own Android TV Box Using Raspberry Pi. So please read this tutorial carefully so you may comprehend it in a better helpful way.

Guide: How to Create Your Own Android TV Box Using Raspberry Pi

Before you begin, it is important to know that the versions of Android and Android TV used in this project are beta versions. As a result, they have some flaws that may not appear on a real Android TV device.

Install Android TV Raspberry Pi 4

  • You will need to have the following features to build your Raspberry Pi Android TV:
    • Raspberry Pi 4 *
    • SD card micro *
    • Power supply for your Raspberry Pi
    • Combi remote (a button and mouse will reset)
    • USB flash drive *
    • An HDMI cable
  • For the software you need, be sure to download the following in advance:
    • LineageOS 17.1 (Android 10) for Raspberry Pi 4
    • SD card writing software BalenaEtcher
    • Open the GApps Pico package. Make sure to select ARM → 10.0 → TVstock.

The method:

  • The whole process, as mentioned earlier, is in a few direct steps.
  • On your Raspberry Pi, install the dedicated Android ROM.
  • Install Android TV software on your Raspberry Pi.
  • Test and enjoy.

The process

  • By installing LineageOS on your Raspberry Pi, you can take advantage of Android OS and better support for media software (such as Kodi or YouTube) which makes your Raspberry Pi a great Android TV.
    • Remove the zipped file and let the objects be set in motion. Remember the micro SD card? Okay, connect it to your PC (insert it into the PC card reader slot) and run Etcher. Click on Select Image which will let you browse the unpacked image file of LineageOS / Android OS. You can write an Android disk image on your micro SD card by clicking Flash. Just make sure you have selected your SD card under Select Drive.
    • Once the process is complete by Etcher, it will tell you and you can extract the micro SD card and insert it into the Raspberry Pi and boot. up. Although it may take some time at the first turn, just be patient and wait. Once completed, set up Wi-Fi connection using mouse and a Keyboard. The alternative is to connect the Raspberry Pi directly to the router via Ethernet cable.
    • The next step is to easily configure LineageOS. It will be basic settings like date, time zone, country, and so on.
    • You already have Android OS running on your Raspberry Pi, but without any Google applications because this is an AOSP version. You need to manually install the application which contains the downloaded GApps package to your PC. Copy it to your USB and insert it into your Raspberry Pi.
    • Open the Drawer App on your LineageOS and proceed as follows; Device Favorites → About. Scroll down to find Build Number and continue clicking repeatedly which will add the Developer Options menu to the screen before.
    • Exit By screen and proceed to Developer Options. Continue as follows from there; Activate Root Access. When the warning tab appears, click ok.
    • Activate the terminal application by scrolling down to the Local Terminal which will allow you to access the Local Shell. Now you can enter the commands via the keyboard.
    • Go back to the Drawer App and reload the Terminal App. To allow applications to access your device, open and click Allow.
    • Enter commands such as:
      • This is the command (superuser), a warning box for the Secret Service will appear. Continue as follows; Remember my choice → Allow.
      • Next, enter the command
      • This will load the recovery script. Next, enter
      • This command will launch the recovery script. Now your Raspberry Pi will boot into the TWP recovery console. Click Install and select your USB as the storage device for this (bottom left corner)
    • Continue as follows; select GApps → Install Zip → Reboot after installation → Swipe to confirm flash. Now click Wipe Dalvik and then swipe to confirm.
      • After clicking the top left icon (it will take you back to the main menu.), Click Wipe and “Buy to Factory Reset”. After that, click Reboot → Settings.
      • After reboot, you will be able to access the Play Store but the LineageOS view will not appear as Android TV. To switch to appear as Android TV, you will need an Application.
    • You can find many launches in the Play Store. Simply search, log in, and insert. Install all the apps you want from Play Store then.
    • If you want to switch for something a little easier to manage your Raspberry Pi Android TV, there are many options available online. Look online for small keyboards with touch keys for Android TV and Raspberry Pi box and many will pop up up.
      • Now that you have your Raspberry Pi Android TV all set up, you can use the controller to browse / manage it as you would for an actual Android TV. You can enjoy many apps as well as install emulators to play games. All programs will be registered to Android TV.

Faq

Guide about How to Create Your Own Android TV Box Using Raspberry Pi


In this guide, we told you about the How to Create Your Own Android TV Box Using Raspberry Pi; please read all steps above so that you understand How to Create Your Own Android TV Box Using Raspberry Pi in case if you need any assistance from us, then contact us.

How this tutorial or guide assisting you?


So in this guide, we discuss the How to Create Your Own Android TV Box Using Raspberry Pi, which undoubtedly benefits you.



Final note

I hope you like the guide How to Create Your Own Android TV Box Using Raspberry Pi. In case if you have any queries regards this article/tutorial you may ask us. Also, please share your love by sharing this article with your friends and family.

Trickbugs: Get the latest Trick and Tips
Logo
Enable registration in settings - general